SKF TMBH 1 [TMBH 1] Portable Induction Heater (Weighing Only 4,5 kg) *DISCONTINUED SEE SKF TWIM 15/230V*

The SKF bearing heater TMBH 1 is a portable lightweight heater for heating bearings with an inner diameter ranging from 20 to 100 mm (0.8 to 4 in) and a maximum corresponding weight of 4,5 kg (10 lb). The heater uses a patented method of heating based on high frequency induction, which provides optimised efficiency. 

This method is very quiet and creates no magnetisation at all. In addition to bearings, the heater can also be used for heating ferrous components such as gears, pulleys, bushings and shrink rings. 

Features:

• Lightweight and portable (4,5 kg – 10 lbs)
  
• Heating efficiency better than 85%
  
• Components are not magnetised
  
• Equipped with temperature and time control
  
• Supplied with a heating clamp, temperature probe, power cable, heat resistant gloves and a carrying case
  

What's In The Box:

• (1) Heating clamp
• (1) Temperature probe
• (1) Power cable
• (1) Heat resistant gloves
• (1) Carrying case
• (1) Instruction manual

Brochure/Datasheet

Instruction manual

---

Note: Prices are not binding , subject to change without prior notice